Class H Insulation Paper

Class H Insulation Paper
Product Introduction:
Class H Insulation Paper presses aramid paper, Mylar polyester film, and aramid paper into one flexible high-temperature composite. The two outer aramid layers carry heat resistance and flame performance; the center Mylar film supplies mechanical strength and breakdown voltage.
Send Inquiry
Description
Technical Parameters

High-Temperature Composite Build

 

Class H Insulation Paper presses aramid paper, Mylar polyester film, and aramid paper into one flexible high-temperature composite. The two outer aramid layers carry heat resistance and flame performance; the center Mylar film supplies mechanical strength and breakdown voltage. Where a Class F 155°C material runs short of headroom on a continuously high-load motor, this product holds a temperature cushion at 180°C, which is why it targets heating conditions ordinary F-class paper cannot cover.

Aging and Flame Margins

 

After 72 hours in a 180°C oven, tensile strength drops only 8%, against the 15% the industry standard allows; a smaller decay keeps mechanical reserve after years of operation and resists brittleness under vibration. Finished breakdown voltage reaches 12kV or higher, above the 10kV industry requirement, leaving room for voltage fluctuation. The material self-extinguishes when the flame source is removed and can accompany the customer through UL94 V0 submission testing.

Installation Positions

 

Class H Insulation Paper sits in driving-motor slot and phase insulation on new energy vehicles, winding wrap on H-class industrial motors that run year-round with little maintenance access, and insulation on traction and mining motors where heat, dust, and friction meet; other specialty electrical systems requiring 180°C and self-extinguishing behavior follow the same logic.

Stamping, QC and Order Terms

 

A stamping machine forms irregular insulation sheets from customer drawings or samples, edges clean and burr-free for direct assembly; four high-precision slitters reach 2.3mm narrow strips at ±0.2mm width tolerance. Wenzhou Gisen Insulation Material Co.,Ltd works under ISO9001 and national-standard controls, testing every batch for breakdown voltage and rejecting failing lots, with tensile tester, breakdown tester, glow wire tester, and drying oven covering strength, insulation, flame, and aging. Third-party inspection is accepted. MOQ 500kg; small free samples ship first; custom samples about 2 weeks, standard 3-4 weeks, custom 4-6 weeks; EXW and FOB; standard 30% deposit/70% balance, custom 50%/50%, RMB or USD; mixed thickness and width within one order; reply within 8 hours.

 

Specification Parameters

 

Parameter

Specification

Temperature class

H-class (180°C)

Finished thickness

0.08~0.45mm

Maximum finished width

1600mm

Minimum slitting width

2.3mm, tolerance ±0.2mm

Composite structure

Aramid paper - Mylar film - aramid paper

 

Hot Tags: class h insulation paper, China class h insulation paper manufacturers, suppliers, factory, AHA heat resistant paper, DMD film fiber composite, high temperature dmd insulation, nhn insulation material, PET insulation paper for slot liners, Polyester film composite

Send Inquiry
you dream it, we design it
Quality insulation materials & integrated procurement solutions.
contact us