Calendered Pressboard

Calendered Pressboard
Product Introduction:
Calendered Pressboard builds on dense pressboard with a calendered finish for a tight, flat surface and water absorption under 1.5%, aimed at partitions and gaskets needing a flush face and low damp pickup. Ordinary board loses insulation after absorbing moisture, a common internal transformer failure path; calendering compresses surface fiber, seats tightly against the winding with no void, and cuts moisture entering from the face, pushing humidity-driven insulation drift down.
Send Inquiry
Description
Technical Parameters

Calendering Against Damp Failure

 

Calendered Pressboard builds on dense pressboard with a calendered finish for a tight, flat surface and water absorption under 1.5%, aimed at partitions and gaskets needing a flush face and low damp pickup. Ordinary board loses insulation after absorbing moisture, a common internal transformer failure path; calendering compresses surface fiber, seats tightly against the winding with no void, and cuts moisture entering from the face, pushing humidity-driven insulation drift down. Calendering compresses surface fiber under pressure rather than adding a film, so the board keeps its 100MPa flexural and 65MPa compression while damp picks up less from the face; a plain board drinks moisture and drifts in breakdown, the internal failure path this finish targets.

Flat Face and Retained Strength

 

The flat dense face seats firmly against adjoining structure with no local gap, shrinking the room where partial discharge can start. Water absorption under 1.5% keeps breakdown voltage steady as little damp enters, so performance does not drift in switchgear or outdoor humidity swings. Density 1.0~1.3g/cm³ keeps the board's 100MPa flexural and 65MPa compression load capacity, so moisture resistance and strength do not trade off.

Flush Partition Positions

 

This Calendered Pressboard lines flush transformer face partitions against the winding, low-absorption gaskets for humidity-fluctuating switchgear and outdoor settings, local isolation surfaces sensitive to void space, and inter-layer pads needing a flat mating face. It serves switchgear compartments and outdoor enclosures where humidity swings would otherwise move breakdown voltage over months, rather than stations calling for peak structural force.

Surface QC

 

Wenzhou Gisen Insulation Material Co.,Ltd holds ISO9001, checking surface flatness, thickness, and absorption per batch with tensile tester, breakdown tester, and drying oven, accepting third-party inspection. Slab sheets or punched formed parts, OEM; MOQ 500kg; samples compare surface condition; thickness 0.55mm, density 1.01.3g/cm³; custom samples 2 weeks, standard 3-4 weeks, custom 4-6 weeks; EXW/FOB; 30%/70%; RMB or USD; packaging per request; active progress feedback; surface flatness, thickness, and absorption checked per batch before release.

 

Specification Parameters

 

Parameter

Specification

Density

1.0~1.3g/cm³

Water absorption

Below 1.5%

Thickness range

0.5~5mm

Temperature class

A-class (105°C) ~ B-class (130°C)

Surface treatment

Calendered, dense and flat

 

Hot Tags: calendered pressboard, China calendered pressboard manufacturers, suppliers, factory, calendered pressboard, cellulose pressboard, electrical insulation pressboard, electrical precompressed pressboard, high purity insulation board, transformer winding board

Send Inquiry
you dream it, we design it
Quality insulation materials & integrated procurement solutions.
contact us