Cutting Moved Upstream
Laminated Pressboard Sheet takes dense insulation pressboard, slits and laminates it into sheets for transformer parts makers, supplying ready-to-use gaskets and formed pieces so the buyer does not open a large board and measure-cut it themselves. The plant buys base board, then slits and punches common blocks, spacers, angle rings, and insulation cylinders to a uniform size; the workshop assembles straight from delivery, saving labor and keeping batch dimensions even, away from the length drift and burrs of hand cutting.
Burr-Free Uniform Parts
Board density 1.01.3g/cm³, slit edges clean and punched parts burr-free so copper enamel is not scratched during assembly. Die-punched shapes follow drawings with sheet thickness 0.55mm covering routine gasket needs, and complex shapes form in one press stroke rather than hand trimming; moving measuring and cutting into the plant removes the buyer's labor while keeping batch dimensions uniform against hand-cut length drift and burrs. Base batch is unified so density and thickness match across formed parts, avoiding assembly-gap differences from loose to tight pieces in one lot.
Ready-to-Assemble Stock
This Laminated Pressboard Sheet fills transformer block gaskets set between coils without secondary cutting, spacer and angle-ring formed parts located along the winding contour, insulation-cylinder sheets rolled into tube isolation, and ready-to-assemble standard parts that cut workshop labor for a parts processor. Each formed part ships with its batch record, so assembly can trace density and thickness back to the producing lot instead of inspecting hand-cut pieces one by one.
Traceable Supply
Wenzhou Gisen Insulation Material Co.,Ltd holds ISO9001, checking sheet thickness, appearance, and breakdown per batch with tensile and breakdown testers, accepting third-party inspection, with batch records attached to formed parts for assembly traceability. Sheets or formed parts by drawing, OEM; MOQ 500kg; samples confirm size before bulk; custom samples 2 weeks, standard 3-4 weeks, custom 4-6 weeks; EXW/FOB; custom 50%/50%; RMB or USD; photo progress; reply within 8 hours. Blocks, spacers, angle rings, and cylinders all run at one density and thickness, so assembly gaps stay even across the batch.
Specification Parameters
|
Parameter |
Specification |
|
Thickness range |
0.5~5mm |
|
Density |
1.0~1.3g/cm³ |
|
Processing |
Slitting, stamping to formed parts |
|
Temperature class |
A-class (105°C) ~ B-class (130°C) |
|
Typical formed parts |
Blocks, spacers, angle rings, insulation cylinders |
Hot Tags: laminated pressboard sheet, China laminated pressboard sheet manufacturers, suppliers, factory, 3240 epoxy glass board, cellulose pressboard, generator winding insulation board, high density transformer board, kraft transformer board, yellow epoxy sheet

