Class H Aramid Paper

Class H Aramid Paper
Product Introduction:
Class H Aramid Paper stacks aramid paper, polyimide film, and aramid paper in three layers: outer aramid handles heat and flame, the middle polyimide film adds a higher heat band and mechanical strength, and the whole reaches C-class 220°C for conditions above 200°C.
Send Inquiry
Description
Technical Parameters

Polyimide Heat Layer Over Aramid

 

Class H Aramid Paper stacks aramid paper, polyimide film, and aramid paper in three layers: outer aramid handles heat and flame, the middle polyimide film adds a higher heat band and mechanical strength, and the whole reaches C-class 220°C for conditions above 200°C. Compared with ordinary H-grade material it adds the polyimide heat layer, fitting charging-pile transformers, high-speed traction transformers, and oil-immersed units that run hot and need oil resistance; plain aramid loses insulation faster in long oil soak, and this composite solves oil and heat at once.

Aging and Oil-Soak Data

 

After 96 hours in a 220°C oven, tensile strength retention reaches 85% against the 70% industry standard, 15 points higher, so aging runs slower and equipment life extends. It carries UL94 V0 self-extinguishing and stays stable in oil: one month immersed in transformer oil drops breakdown voltage only 5%, built for long soak; the polyimide middle layer also resists mechanical pull in winding wrap. Versus a Nomex-plus-polyimide scheme, domestic aramid plus polyimide runs about 25% cheaper with close performance, cutting cost without giving up the grade, and samples can be sent for a side-by-side comparison before switching.

Oil and Charging-Pile Duty

 

This Class H Aramid Paper goes into oil-immersed transformer insulation layers, C-class dry-type and charging-pile transformers at 200°C, high-speed rail traction transformers under continuous heat and vibration, and high-temperature industrial furnaces above 200°C.

Proofing and Cost

 

Wenzhou Gisen Insulation Material Co.,Ltd holds ISO9001, checking high-temperature aging, breakdown voltage, and flame per batch with tensile, breakdown, and glow wire testers, accepting third-party inspection; a charging-pile transformer company at about 200°C working temperature replaced a high-priced scheme, passed two months of breakdown and heat tests, and buys in bulk at about 25% below the original. Punchable and slit to narrow strips, OEM; MOQ 500kg; free samples; custom samples 2 weeks, standard 3-4 weeks, custom 4-6 weeks; EXW/FOB; 30%/70%; RMB or USD; packaging per request; photo progress. The aramid-polyimide-aramid build suits both oil-immersed soak and 200°C dry heat, and slit strips or punched parts follow the buyer's winding geometry.

 

Specification Parameters

 

Parameter

Specification

Temperature class

H-class (180°C) ~ C-class (220°C)

Finished thickness

0.08~0.45mm

Minimum slitting width

2.3mm, tolerance ±0.2mm

Composite structure

Aramid paper - polyimide film - aramid paper

220°C/96h strength retention

85% (industry standard 70%)

 

Hot Tags: class h aramid paper, China class h aramid paper manufacturers, suppliers, factory, carbon loaded crepe, corrugated insulation board, electrical insulating paper roll, high stretch pressboard, high temperature diamond paper, thermal stable dotted paper

Send Inquiry
you dream it, we design it
Quality insulation materials & integrated procurement solutions.
contact us