Single-Sided Dotted Paper

Single-Sided Dotted Paper
Product Introduction:
Single-Sided Dotted Paper places diamond-grid epoxy dots on one face only; the reverse stays a flat, clean insulation base. At room temperature the dotted face is solid and dry, and heat-pressing bonds just the dotted side while the flat face rests against the coil, core, or insulation layer.
Send Inquiry
Description
Technical Parameters

One-Side Fixation, Clean Reverse

 

Single-Sided Dotted Paper places diamond-grid epoxy dots on one face only; the reverse stays a flat, clean insulation base. At room temperature the dotted face is solid and dry, and heat-pressing bonds just the dotted side while the flat face rests against the coil, core, or insulation layer. The design fits stations that need fixation on one side only, keeps the un-bonded face in pure base condition, stops excess dots from staining the adjoining surface, and saves glue cost where fixation is not required.

Lower Dot Height for Single Load

 

Only the dotted side bonds on one press, a simpler operation than double-sided dotting where workers must tell faces apart. The diamond dots cover about 15% while the flat reverse keeps a complete insulation base, so single-side bonding does not weaken the back side that also carries potential isolation. Dot height and cure speed tune to the buyer's press conditions; a single-loaded station needs less glue, so a slightly lower dot height gives enough holding force, and dots set too high squeeze out and stain edges during pressing. Bases include DMD paper, PET film, and aramid paper matched to temperature rating.

Where Single-Side Fits

 

Typical use for this Single-Sided Dotted Paper is one-sided inter-layer fixation in dry-type transformers, single-side location of motor slot liners against the wall with the back resting on the coil, single-layer reactor wrap binding without sticking neighboring layers, and insulation stacks where dual bonding would complicate later disassembly and repair.

Coating QC and Supply

 

Wenzhou Gisen Insulation Material Co.,Ltd coats under ISO9001 and national-standard control, keeping dot positions neat and the reverse free of overflow, checking dot height, reverse cleanliness, and insulation per batch, and accepting third-party inspection. Strips or sheets slit to requested width for wrapping machines and hand stations. OEM covers base, dot height, cure speed, and packaging; MOQ 500kg; free small samples for press trial; custom samples 2 weeks, standard 3-4 weeks, custom 4-6 weeks; EXW/FOB; 30%/70%; RMB or USD; active progress feedback.

 

Specification Parameters

 

Parameter

Specification

Maximum finished width

2000mm

Dotted face

Single-sided; reverse is flat clean base

Temperature class

F-class (155°C) ~ C-class (220°C)

Minimum slitting width

6mm

Finished thickness

0.05~4.0mm (varies by base)

 

Hot Tags: single-sided dotted paper, China single-sided dotted paper manufacturers, suppliers, factory, anti static crepe paper, Black Semiconductor Crepe Paper, cable insulating paper, class H diamond paper, corrugated insulation board, generator insulation paper

Send Inquiry
you dream it, we design it
Quality insulation materials & integrated procurement solutions.
contact us