Intermediate Stock, Buyer's Mold
FR4 Epoxy Prepreg is fiberglass cloth reinforced and impregnated with epoxy in a B-stage semi-cured state, dry to the touch at room temperature. The buyer cuts it, lays it in a mold, hot presses it, and resin melts, flows, and cures into a hard insulating structural part. It combines the cloth's skeleton strength with the resin's insulation seal, carrying mechanical support and electrical isolation at once after forming, for transformers, motors, and electrical equipment needing high-strength insulation components. The buyer holds an intermediate stock to cut and stack; final shape comes from their own mold and press, and the plant agrees on cut size and cure process against drawings and press parameters rather than mixing resin on site.
Cure Window and B-Stock Handling
Cure runs 150-170°C, 35MPa, 30 to 60 minutes; the plant advises a window by part thickness and the buyer fine-tunes on their press, extending hold for thick parts and shortening for thin. B-stage state makes cutting and stacking easy, resin flows only after heating so nothing sticks early and position can be settled before mold close. The cloth supplies skeleton strength that resists deformation in cured parts under clamp force and vibration, and resin fills fiber gaps into a dense, non-delaminating, non-blistering body.
Hard Structural Parts
This FR4 Epoxy Prepreg forms transformer support partitions and blocks that take coil clamp force while isolating potential, motor end-winding fixtures that resist running vibration, busbar insulation pads under copper clamp force, and other hard high-strength parts shaped in the customer mold.
Proofing Cure Curve
Wenzhou Gisen Insulation Material Co.,Ltd holds ISO9001, checking resin state, appearance, and insulation per batch with tensile tester, breakdown tester, and drying oven, accepting third-party inspection; sheets cut to drawings or roll stock, cure curve confirmed at proofing with a small trial press before bulk. MOQ 500kg; free samples; custom samples 2 weeks, standard 3-4 weeks, custom 4-6 weeks; EXW/FOB; custom 50%/50%; RMB or USD; progress photos.
Specification Parameters
|
Parameter |
Specification |
|
Base |
Fiberglass cloth impregnated with epoxy |
|
Resin state |
B-stage semi-cured |
|
Cure condition |
150-170°C, 35MPa, 30~60 minutes |
|
Temperature class |
H-class (180°C) ~ C-class (220°C) |
|
Finished thickness |
0.1~0.5mm; roll slit or cut to drawing |
Hot Tags: fr4 epoxy prepreg, China fr4 epoxy prepreg manufacturers, suppliers, factory, electrical fiberglass prepreg, fiberglass grid coating, fiberglass prepreg fabric, fibre reinforced prepreg, glass fibre prepreg, motor insulation prepreg

