Inorganic Nonburning Cloth
Fiberglass Epoxy Prepreg impregnates epoxy onto fiberglass cloth, an inorganic material that does not burn. After curing it works long term at 180°C and tolerates 200°C in emergencies. The cloth's tensile strength far exceeds organic bases, giving a cured part that stays strong against vibration, positioned as a high-strength insulation structural material for mining transformers and traction motors where flame resistance and vibration load are both required. Organic prepreg tends to crack under vibration; the fiberglass cloth removes fatigue cracking at the substrate level, and cured resin binds the cloth into one body with strength carried along the fibers.
Post-Cure Mechanical Data
After curing, flexural strength reaches 450MPa, insulation resistance 10^13Ω, breakdown voltage 20kV/mm, figures well above ordinary prepreg, so the part carries structural load and electrical isolation without choosing between them. The non-burning cloth plus cured epoxy suits mining and outdoor stations with hard flame requirements, and flame does not spread after the source leaves. Cure runs 150-170°C, 35MPa, 30 to 60 minutes in the mold, with the plant supplying the formula cure curve for the buyer's press.
Mining and Traction Duty
This Fiberglass Epoxy Prepreg builds mining-transformer insulation parts that take underground vibration and pass flame requirements, traction-motor end fixtures under long alternating load without cracking, wind-turbine structural parts under outdoor alternating load balancing weather resistance and strength, and busbar insulation and other high-strength positions under clamp force.
Vibration-Test Verification
Wenzhou Gisen Insulation Material Co.,Ltd holds ISO9001, checking resin content, appearance, and insulation per batch with breakdown tester, tensile tester, and glow wire tester, accepting third-party inspection; a mining transformer company that required flame and vibration moved off organic prepreg that cracked on vibration test, passed, and adopted it across the machine with steady batch reorders. Sheets cut for molding; MOQ 500kg; free samples; custom samples 2 weeks, standard 3-4 weeks, custom 4-6 weeks; EXW/FOB; custom 50%/50%; RMB or USD; photo progress.
Specification Parameters
|
Parameter |
Specification |
|
Finished thickness |
0.1~0.5mm |
|
Temperature class |
H-class (180°C) ~ C-class (220°C) |
|
Flexural strength |
450MPa |
|
Breakdown voltage / insulation resistance |
20kV/mm; 10^13Ω |
|
Cure condition |
150-170°C, 35MPa, 30~60 minutes |
Hot Tags: fiberglass epoxy prepreg, China fiberglass epoxy prepreg manufacturers, suppliers, factory, electrical fiberglass prepreg, electrical insulating prepreg, fiberglass grid coating, fiberglass prepreg, fiberglass prepreg fabric, SHS insulation material

