E-Glass Epoxy Prepreg

E-Glass Epoxy Prepreg
Product Introduction:
E-Glass Epoxy Prepreg uses E-grade alkali-free fiberglass cloth impregnated with epoxy in B-stage semi-cured state. Alkali-free cloth gives stable electrical behavior and uniform dielectric, a standard base for general electrical laminates, positioned for regular high-strength insulation structures in medium- and high-voltage transformers, instrument transformers, capacitors, and reactors where the buyer hot-presses size-stable hard insulation blocks and supports.
Send Inquiry
Description
Technical Parameters

Alkali-Free Uniform Dielectric

 

E-Glass Epoxy Prepreg uses E-grade alkali-free fiberglass cloth impregnated with epoxy in B-stage semi-cured state. Alkali-free cloth gives stable electrical behavior and uniform dielectric, a standard base for general electrical laminates, positioned for regular high-strength insulation structures in medium- and high-voltage transformers, instrument transformers, capacitors, and reactors where the buyer hot-presses size-stable hard insulation blocks and supports. The cloth selects Grade A alkali-free material with no recycled cloth, and pure resin without filler, so pressing yields no delamination or blistering and avoids local defects from recycled impurities or settled filler.

Filler-Free Pure Resin

 

Uniform dielectric in the alkali-free cloth keeps insulation even across the cured part with no local weak point, which matters for instrument transformers sensitive to dielectric stability. A pure resin system without filler avoids local resin starvation from filler settling, leaving a flat surface and even resin content after pressing. Cure conditions 150-170°C, 35MPa, 30 to 60 minutes adjust hold time by part thickness, and B-stage state eases cutting and stacking with free positioning before mold close.

Medium-High Voltage Parts

 

This E-Glass Epoxy Prepreg makes medium-/high-voltage transformer blocks and supports under coil clamp, instrument-transformer inter-layer parts matching high-precision metering to cut local field concentration, capacitor and reactor insulation pads under clamp that do not loosen over time, and general hard parts molded in the customer die.

Proofing Before Bulk

 

Wenzhou Gisen Insulation Material Co.,Ltd holds ISO9001, checking impregnation evenness, appearance, and insulation per batch with tensile, breakdown, and glow wire testers, accepting third-party inspection. Grade A alkali-free cloth and filler-free resin keep the cured part free of local weak points; roll stock or sheets cut to drawings, and the cure curve plus cut size are confirmed at proofing with a trial press before bulk production, avoiding rework after large orders. MOQ 500kg; free samples; custom samples 2 weeks, standard 3-4 weeks, custom 4-6 weeks; EXW/FOB; custom 50%/50%; RMB or USD; photo progress; reply within 8 hours.

 

Specification Parameters

 

Parameter

Specification

Base

E-grade alkali-free fiberglass cloth

Resin state

B-stage semi-cured epoxy

Cure condition

150-170°C, 35MPa, 30~60 minutes

Temperature class

H-class (180°C) ~ C-class (220°C)

Supply form

Roll stock or sheets cut to drawing

 

Hot Tags: e-glass epoxy prepreg, China e-glass epoxy prepreg manufacturers, suppliers, factory, b stage fiberglass prepreg, electrical fiberglass prepreg, fiberglass grid coating, fiberglass prepreg, prepreg, woven fiberglass prepreg

Send Inquiry
you dream it, we design it
Quality insulation materials & integrated procurement solutions.
contact us